In case, you do not see blue navigation panel at left, please click here and then locate this page on the blue navigation panel at left.

WELD LINE IN MOULDING

Weld line ocures when two melt streams join. Melt stream gets divided at cutout (core) in the part and they join at the other end of the cut out.

Normally weld line region is filled at the end of injection stroke or during pressure phase.

Strength of the weld line is weak when partially frozen melt front meet. The orientation at the joint remains perpendicular to direction of flow -a sign of weakness.

Weld line can form by melt stream flowing in same direction or in opposite direction.

It is not possible to eliminate weld line, but it can be made sufficiently stronger or its position can be altered.

MELT STREAM FROM OPPOSITE DIRECTION

 

CHANGING WELD LINE POSITION

Previous Sink Marks,
Next Problems ∓ Causes,

Click here to see Understanding QUALITY

Let us understand the factors influencing quality consistency in processing and quality in performance

Let us understand moulding problems.


Back HOME

1