Coimbatore Sub Chapter
in collaboration with
DEPARTMENT OF POLYMER ENGINEERING
One-Day SEMINAR ON
"PROCESSING OF POLYMERS FOR PROFITS"
at Amriteshwari Hall, AITEC, Coimbatore on 25th January 2003.
In case, you do not see blue navigation panel at left, please click here and then locate this page on the blue navigation panel at left.
| Indian Plastics Institute Coimbatore Sub Chapter in collaboration with DEPARTMENT OF POLYMER ENGINEERING One-Day SEMINAR ON "PROCESSING OF POLYMERS FOR PROFITS" at Amriteshwari Hall, AITEC, Coimbatore on 25th January 2003. |
|
 |
Dr.N.N.Pilai, Director,AITEC with Polymer Engineering students at the Seminar. |
 |
Polymer Engineering students at the Seminar. |
 |
Prayers to begin with. |
 |
Director Dr.N.N. Pillai with speakers - Dr.MPK Unni, General Manager( Fibre Mfg and R and D) and Mr.P.C.Bolur, consultant |
 |
Dr.N.N.Pillai welcomming Mr.V.Chinnaswamy-Chairman of IPI -Coimbator Chapter. |
 |
Welcome to Mr.V.Chinnaswamy. |
 |
Welcome to Dr.N.N.Pillai. |
 |
Welcome to Mr. Prabodh C. Bolur. |
 |
Welcome to Dr.MPK Unni. |
 |
Prof.R.Subba Rao addressing seminar participants. |
 |
Dr. N.N. Pillai addressing seminar participants. |
 |
Mr.V.Chinnaswamy addressing seminar participants. |
 Inagurating the SEMINAR by lighting lamp. |
  |
 |
 |
 |
Partcipants in the SEMINAR. |
 |
Mr.Prabodh C. Bolur presenting a paper on "Cycle time reduction in Injection moulding. |
 |
Mr.M.Kannan presenting a paper on Polymer material selection for Injection Moulding. |
 |
Dr.MPK Unni presenting a paper on Chemistry, Physics and Engineering fundamentals for Profits from Injection and Stretch Blow Moulding of PET Containers. |
 |
Mrs. Lakshmi Madhu presenting a paper on Polypropylene for enhancement of Profits and Performance. |
 |
 |
National Anthem. |
Home, A Guide to Injection Moulding of Plastics, Archieves of Articles by Prabodh C. Bolur, Useful Links , Author, Contact Author
